HFC Series High Flow Filter Cartridge


HFC Series High Flow Filter Cartridge is made of diameter 6 "(152.4mm) and pleated design, with high-strength pp center core, outside to inside flow direction. Outer cage have two types: integral pp cage and polyester mesh.

Features

  • Outer cage is one piece, we are the only one in domestic.
  • Filtration systems are 50% smaller than typical size system.
  • Gradient aperture deep polypropylene fiber filter media, aperture along the fluid motion direction becomes smaller, levels intercept different sizes particles, which has excellent dirt holding capacity and low flow resistance.

Applications

  • RO pre-filtration, desalination pretreatment and a variety of process water filtration.
  • Power plant supplementary water, condensation water, coolant filtration.
  • Biopharmaceutical industry pharmaceutical raw materials, solvents, water filtration.
  • Petrochemical industry various solvents, quench water, brine and other chemicals filtration.

Material of Construction

  • Filter Media:  polypropylene microfiber/ glass borosilicate microfiber
  • Support: PP/PE
  • End Caps: glass fiber reinforcement polypropylene
  • O-rings/Gasket: MBR/EPDM/Viton
  • Sealing Technology: Thermal Bonding, No Adhesives

Dimensions

OD: 6" (152.4mm)
Length: 40"
Filtration area: 6 m2/40"

Operation conditions

  • Pore Size, μm: 1, 5, 10, 15, 20, 40, 70
  • Maximum Differential Pressure: Forward:Polypropylene: 3.44 bar @ 82 ℃;glassfiber: 3.44bar @ 121 ℃
  • Suggestion operation condition: 2.5 bar @ 20 ℃
  • Suggestion max flow rate: 70m3/h 40" filter