HFE Series High Flow Filter Cartridge


HFE Series High Flow Filter Cartridge is made of diameter 6 "(152mm), single open end, port size 180mm, without inner core, inside to outside flow direction. End caps and filter layer using hot-melt welding, no bonding agent, with a wide range of chemical compatibility, can be applied to various fields. It’s our new design, which can completely replace the filter bag.

Features

  • Outer cage is one piece, we are the only one in domestic.
  • Inside to outside flow direction keeps all of the contamination catched.
  • Gradient aperture deep polypropylene fiber filter media, aperture along the fluid motion direction becomes smaller, levels intercept different sizes particles, which has excellent dirt holding capacity and low flow resistance.

Applications

  • Petrochemical:Various solvents, chilled water, brine filtration
  • Power Plant: Iron removal filters element, condensate filter element, stator cooling water, etc.
  • Industrial: Process fluid, process water, condensed water, coolant, wastewater treatment;
  • Food and Beverage: Process water;
  • General Purpose: RO Prefiltration, all kinds process water purification

Material of Construction

  • Filter Media:  polypropylene microfiber/glass borosilicate micrfiber
  • Support: PP/PE
  • End Caps: glass fiber reinforcement polypropylene
  • O-rings/Gasket: MBR/EPDM/Viton
  • Sealing Technology: Thermal Bonding, No Adhesives

Dimensions

OD: 6" (154mm)

Size

  • Size 1: L=16" (370mm) to replace size 1 filter bag
  • Size 2: L=32"(634mm) to replace size 2 filter bag

Flange

  • Flange B for side inlet/bottom outlet
  • Flange C for top inlet/bottom outlet

Operation conditions

  • Pore Size, μm: 0.5, 1.0, 5, 10, 20, 50, 100, 140, 200
  • Maximum Differential Pressure: Forward:Polypropylene: 3.44 bar @ 82 ℃; Glass borosilicate microfiber: 3.44 bar @ 121 ℃
  • Suggestion operation condition: 2.5 bar @ 20 ℃