Industrial UV Sterilizer


Products brief

Sample image

Commercial and residential Ultraviolet Water Sterilizer Systems are specifically designed to meet the demanding microorganism control concern. These microorganisms can range from bacteria and viruses to algae and protozoa. A major advantage of UV treatment is that it is capable of disinfecting water faster than chlorine without cumbersome retention tanks and harmful chemicals to the water, and laso with the features of extremely cost efficient, the most ecological way of treating the water wherever it needs. 
Commercial and residential Ultraviolet Water Sterilizer Systems are manufactured with axial flow reactors in 304 stainless steel. The UV lamp incorporates natural ultraviolet light energy to eradicate microbiological contamination. Water enters through the bottom part of the reactor chamber and swirls around a high output, low pressure mercury vapor lamp thermally protected by a quartz sleeve. The UV lamp emits powerful ultraviolet light. Energy components contained in microorganisms absorb the light energy; this disrupts the DNA and prevents reproduction. The UV lamp should be replaced annually.
Applications include post undersink water filters, post whole house water filters, water coolers, pre and post osmosis systems, private wells, camp grounds, hotels, bottlers, aquaculture, hospitals, food, cottages, restaurants, breweries, laboratories, marine, pharmaceutical, dairies and many other applications.
Units are manufactured standard with 110v electrical outlet but are also available in 220v if requested.


  • No chemicals added to the water supply - no byproducts, (i.e. chlorine + organics = trihalomethanes).
  • Environmentally and user friendly, no dangerous chemicals to handle or store, no risks of overdosing.
  • Easy installation, only two water connections and a power connection.
  • No change in taste, odor, pH or conductivity or the general chemistry of the water.
  • More effective against viruses than chlorine.
  • Extremely economical operating cost.
  • Immediate treatment process, no need for holding tanks, long retention times, etc.
  • Automatic operation without special attention or measurement, operator friendly.
  • Simplicity and ease of maintenance, periodic cleaning, (if applicable), and annual lamp replacement, no moving parts to wear out.
  • No handling of toxic chemicals, no need for specialized storage requirements.
  • Low initial capital cost as well as reduced operating expenses when compared with similar technologies such as ozone, chlorine, etc.

Product specifications 

UV-C Sterilizer Standard List

Type    110WUV-C  220WUV-C  165WUV-C  275WUV-C  385WUV-C  440WUV-C 
 A  pure water  5.4t/hr (24GPM)  10t/hr (48GMP)  8.1t/hr (36GPM)  13.6t/hr(60GPM)  19t/hr(84GPM)  21.8t/hr (96GPM)
 B  fountain  4.32t/hr (19.2GPM)  8t/hr (38.4GPM)  6.48t/hr(28.8GPM)  10.8t/hr(48GPM)  15.2t/hr(67.2GPM)  17.4t/hr(76.8GPM)
 Lamp Rated Life (Hrs)    8000
 UV Dosage (UW-SEC/cm2)    >30000
 Electricity Unit  Volts  100-240 
 Hz  50/60     
 Watts  110W  220W  165W  275W  385W  440W
 Lamp Failure Warning System   visable  LED    
 audible  ALARM     
 Timer   YES     
 Nos. of UV Lamp Needal   2X55W  4X55W  3x55W  5X55W  7X55W  8X55W
 Overall Dimension(mm)   ø140×970x342  ø180x970x382  ø140x970x342  ø220x970x422  ø220x970x422   ø260x970x540 
 Shell Material (Stainless steel)   304#     
 Inlet/Outlet Muzzle Size (NPT)   1"~1.5"  1.5"~2"  1"~1.5"  1.5" ~2"  2" ~2.5"  2.5"~3"
 Type of Lamp Holder   G13  G13  G13  G13  G13  G13
 Max Operating Pressure(Mpa)   0.8  0.8  0.8  0.8  0.8  0.8
 UV Lamp Maker   PHILLIP,HOLLAND     
 Qty (PCS)   1  1  1  1  1  1
 N.W. (KG)   11  19.45  13.42  21.16  23.36  27.3
 G.W. (KG)   13  20.64  14.54  23.46  25  30.8
 Carton Measurement (cm)   101X20X40.5  101X20X40.5  101X20X40.5  101X28X50  101X28X48.5  101X33X61